Oil Absorbent Powder N-Sorbents by Bignanotech: The “One Sprinkle – Completely Dry Surface” Solution That Helps Businesses Stay Ready for Decision 04/2026/QĐ-TTg
Have you ever stood in front of spilled machine oil, hydraulic oil, or fuel spreading across a concrete floor, epoxy surface, or asphalt road and felt exhausted right from the start? Production downtime stretches on, slippery floors create accident risks, unpleasant odors linger, cleaning chemical and waste treatment costs skyrocket, and the pressure from increasingly strict environmental regulations keeps growing.
From February 10, 2026, Decision 04/2026/QĐ-TTg issued by the Prime Minister officially took effect, replacing previous regulations. The new regulation sets clearer requirements for on-site response plans, minimum equipment and materials, prioritization of mechanical methods (contain – absorb – collect), near-source spill control, and prevention of secondary pollution. Facilities with potential risks (factories, petroleum depots, ports, retail stations, repair workshops, etc.) are now required to be more proactive than ever.
In this context, Oil Absorbent Powder N-Sorbents(code NS10) from Bignanotech emerges as a practical, simple yet highly effective tool that helps businesses fully meet the spirit of “proactive – timely – near-source – environmental protection” under Decision 04/2026.
What is Oil Absorbent Powder N-Sorbents and Why Is It Different?
Oil Absorbent Powder N-Sorbents is a multi-purpose absorbent powder manufactured 100% in Vietnam from recycled natural cellulose (sugarcane bagasse, rice husks, industrial waste paper, etc.), then treated with nanotechnology to create a hydrophobic coating and an ultra-fine capillary structure. Thanks to this structure, the powder preferentially “embraces” hydrocarbon molecules (oil, gasoline, grease) while absorbing almost no water, and securely locks the oil inside so it cannot be released again.
Key Technical Specifications (according to official Bignanotech data):
- Product Code: NS10
- Composition: 100% nano-modified recycled cellulose, free of toxic chemicals
- Color: Natural brown (easy to observe when saturated)
- Packaging: 10 kg bag (approx. dimensions 52 × 36 × 12 cm)
- Absorption Capacity: Up to 4 liters of oil per 1 kg of powder (typically 1.5–4 times its weight depending on oil type)
- Absorption Time on hard surfaces: Under 5 minutes (faster with thinner oils)
- Moisture Content (packaged): 10–15% (no clumping, ready to use)
- Density: Approx. 0.12 g/cm³ (lightweight, easy to spread)
- Biodegradability: 100% within 6–12 months
- Safety: Non-toxic, non-corrosive, non-flammable; safe for humans, animals, and plants
- Shelf Life: 2 years (store in a cool, dry place)
Unlike sand, sawdust, or ordinary imported chemical powders, Oil Absorbent Powder N-Sorbents not only absorbs but also cleans the surface completely dry — no residual oil film, no slipperiness, no odor — without the need for secondary cleaning with soap or solvents.
Mechanism of Action and Practical Usage (Just 4 Steps)
- Stop the source and create a containment ring: Close the valve or block the leak source. Sprinkle powder to form a 5–7 cm high ring around the spill to prevent spreading.
- Cover the entire surface evenly: Spread the powder over the entire oil area at a thickness of about 0.5–1 cm (thicker for heavier oils). Reference ratio: approximately 0.25 kg of powder for 1 liter of thin diesel oil; increase to 0.3–0.35 kg/liter for thicker oils.
- Sweep and wait for saturation: Use a stiff broom to sweep in a spiral motion from the outside inward. Observe the powder turning from light brown to dark brown/black — when the surface is completely dry, saturation is achieved.
- Collect and dispose: Sweep the saturated powder into a hazardous waste container and hand it over to a licensed treatment unit in accordance with regulations. Do not dispose of it down drains.
Important notes: Do not use for strong concentrated acids/alkalis or mercury. If faint oil stains remain, simply apply an additional thin layer.
Real Benefits That Match Customer Needs and Decision 04/2026 Requirements
- Fast – reduces production downtime: Handles spills in just a few minutes instead of hours, meeting the requirements for timely and near-source response.
- Completely clean and safer workplace: Dry, non-slip surface reduces accident and fire/explosion risks (by lowering hydrocarbon vaporization).
- Long-term cost savings: Higher absorption capacity means less product is needed, smaller volume of hazardous waste requiring treatment, and no extra chemical cleaners.
- Environmentally friendly & easy compliance: 100% biodegradable with no secondary pollution — strongly supports proper hazardous waste collection and the development of response plans according to the appendices of Decision 04/2026.
- Versatile and easy to deploy: Handles mineral oils, gasoline, diesel, animal/vegetable fats, solvents, oil- or water-based paints, biological fluids, and more on various hard surfaces (concrete, metal, asphalt, wood…). Suitable for factories, mechanical workshops, warehouses, ports, gas stations, and even small garages or households.
Comparison with traditional methods:
- Sand/sawdust: Low absorption (0.5–2 liters/kg), leaves residual oil and dust.
- Imported chemical powders: Higher price, longer lead times, and sometimes still require secondary rinsing.
Oil Absorbent Powder N-Sorbents offers the advantage of being “Made in Vietnam” — competitive pricing, stable supply, and advanced nano technology.
Who Should Equip Oil Absorbent Powder N-Sorbents Right Away?
Manufacturing enterprises, petroleum storage facilities, ports, retail fuel stations, repair workshops, construction contractors… that need to complete their oil spill response plans and minimum materials according to Decision 04/2026. The product helps you demonstrate readiness during inspections, reduce the risk of administrative penalties, and lower potential environmental compensation costs.
Turn oil spill incidents into professional, clean, and fully compliant operations. Contact Bignanotech today for dosage consultation tailored to your facility’s scale:
- Official Website: bignanotech.com
- Hotline: 0879 808 080/ 094 386 7099/ 0868 939 595
- Email: sales@bignanotech.com
- Follow: Facebook Bignanotech , Youtube Bignanotech & Tiktok Bignanotech
Oil Absorbent Powder N-Sorbents – Vietnam’s Nano Cellulose: Fast Absorption – Completely Dry – Safe – Fully Compliant with Decision 04/2026. Equip it today for greater peace of mind in daily operations.
