Manufacturing Bussiness
3 July, 2024
H-FIBER Chemical Absorbent Pads for High-Concentration Acid/Base

Chemical absorbent pads are commonly used to absorb various acids, bases, corrosive substances, and high-concentration chemicals. These products can clean chemical-contaminated equipment, large spills, or continuous leaks of liquids to minimize damage when chemical spills occur.

H-FIBER chemical absorbent pads are manufactured using Japanese Nano technology, featuring superior absorption speed and excellent retention of absorbed liquids. The material is non-flammable and treated with anti-static properties as required for fire and explosion prevention, making it particularly safe to use.


  • Capable of absorbing various acids, bases, corrosives, chemicals, and unidentified liquids, even highly concentrated solutions such as 98% sulfuric acid and 30% sodium hydroxide.
  • H-FIBER chemical absorbent pads by BIGNANOTECH are produced using Japanese Nano technology, with a distinctive perforated design that allows the product to absorb much faster than similar products.
  • H-FIBER chemical absorbent pads do not degrade or cause dangerous reactions when exposed to corrosive substances. The product has a long lifespan and does not fray or tear even when saturated.


  • Environmentally friendly
  • Ten times higher absorption capacity compared to other products
  • Non-toxic to the environment, humans, and animals
  • Cost-effective, economical, easy to use


  • An ideal and safer replacement for regular cleaning cloths when handling hazardous chemicals.
  • Used to clean and wipe areas where chemical spills and hazardous solutions have occurred on floors or the ground; used to wipe chemical-contaminated machinery parts and tools during transportation or use.
  • Suitable for placing under machinery and cleaning equipment in factories and workshops.
  • Frequently used in laboratories, chemical storage areas, around battery packs and dipping tanks, processing plants, boiler rooms, R&D rooms, chemical storage warehouses, industrial zones, and industries involving chemicals and hazardous chemical leak risks.


  1. Wear protective gloves (or protective clothing) to avoid direct contact with harmful chemicals.
  2. Gently place the chemical absorbent pad on the surface of the spill or chemical stain to maximize contact area.
  3. Wait 3-5 minutes for the pad to gradually absorb the chemical, then turn the pad over and wait for the same duration. The pad will darken as it absorbs the solution. When the pad is fully saturated (entirely darkened), it is considered saturated.
  4. Squeeze and collect the absorbed chemicals into a container for reuse (if needed). The pad can be reused immediately after wringing out the chemicals to absorb spills in other areas.
  5. After handling the spill, quickly place the saturated absorbent pad in a designated hazardous waste bin or storage area, away from heat/fire sources, water tanks, and do not dispose of it directly into the environment.

    Note: Store the product in a dry place, avoiding damp conditions.

Check out other chemical absorbent products HERE: CHEMICAL ABSORBENT PRODUCTS

For more information on products and industrial cleaning solutions, please contact:
Hotline: (+84) 879 808 080 – (+84) 868 939 595