Chemical Absorbent Pad

Material: Polypropylene

Color: Pink

Packaging: 100 pads/carton

Chemical Absorbent Pads are the ultimate product for absorbing and collecting a wide range of acids, bases, corrosives, chemicals and unknown liquids, even highly concentrated solutions such as 98% sulfuric acid and sodium hydroxide 30%. The product can clean up large spills or continuous leaks of liquid to minimize damage when chemical spills occur.

H-FIBER Chemical Absorbent Pad is manufactured using Japanese Nano technology, has a quick absorption rate and effectively holds liquid. The material of the product is non-flammable and is treated with anti-static electricity according to fire and explosion prevention requirements, so it is especially safe to use.

The product is used to quickly absorb chemicals and hazardous solutions on the floor and on the ground; Used to clean machine parts and tools contaminated with chemicals during transportation and use.

Chemical absorbent pads are commonly used in laboratories, in chemical storage areas, around battery packs and dip tanks, in process plants, in boiler rooms, R&D rooms, and chemical storage warehouses. chemicals, industrial parks, industries related to chemicals and at risk of toxic chemical leakage.

• Absorbs a wide range of acids, bases, corrosives, chemicals and unknown liquids – even high concentrations such as 98% sulfuric acid and 30% sodium hydroxide
• The product’s pink color is designated for hazardous chemicals and is easy to identify in an emergency.
• Not degrade or cause dangerous reactions when exposed to corrosive substances.
• Have a very long lifespan and do not wear out even when saturated.
• Have a compact design, easy to transport and use.

Step 1: Wear protective gloves (or protective clothing) to avoid direct contact with hazardous chemicals with the skin.

Step 2: Gently place the chemical absorbent pad on the surface of the spill or chemical stain so that the product has the maximum contact area.

Step 3: Wait 3-5 minutes for the pad to slowly absorb the chemical, change the pillow side and wait the same time. The product will change color darker when all the solutions have been absorbed. When the product is saturated with chemicals (the entire color changes) it will become saturated.

Step 4: Squeeze and recover the amount of chemicals that have just been absorbed into the pad for reuse (if needed). The product can be reused immediately after the chemical has been squeezed dry to absorb other spilled areas.

Step 5: After completing treatment of the incident area, quickly put the saturated (soaked) chemical absorbent pad into a specialized trash can or hazardous waste storage place, away from heat/fire sources, away from water tank area, and do not discharge directly into the environment.

Note: Store the product in a dry place, avoid letting the product get wet